top of page

PUBLICACIONES EN CONFERENCIAS

  1. Contreras Raggio J., Pardo M., Núñez P., Vivanco J.F., Aiyangar A., “The Effect of Processing Parameters on the Printability and Mechano-biological Properties of Polycaprolactone–Bioactive Glass Composites for Direct Ink Writing of Scaffolds: a Fractional Design Approach”. European Society for Biomaterials (ESB), Davos, Switzerland, September 2023.​

  2. Contreras Raggio J., Pardo M., Núñez P., Vivanco J.F., Aiyangar A., “Pre-Printing and in situ Characterization of Biocompatible Composite Inks for Direct Ink Writing of Finite Sized Scaffolds with Highly Controlled Porous Structures”. European Society for Biomaterials (ESB), Davos, Switzerland, September 2023.

  3. Correa A., Zojaji M., Parkhill A., Kunath B., Vivanco J.F., Rainbow R., Ploeg H.L.“Mechanical Loading of ex-vivo Bovine Trabecular Bone in 3D-Printed Bioreactor” European Society of Biomechanics (ESB), Maastricht, Netherlands, July 2023.

  4. Zojaji M., Correa A., Parkhill A., Kunath B.A., Vivanco J.F., Rainbow R., Ploeg H.L. “Validation of Finite Element Analysis for Bone Remodeling Simulation With Ex Vivo Mechanical Testing Of Bovine Trabecular Bone”. Canadian Connective Tissue Conference (CCTC), Toronto, ON, Canada, June 2023.

  5. Beloglowka K., Vivanco J.F., García-Rodríguez S., Pilkey A.K., Lievers W.B., Ploeg H.L. “Finite Element Mesh Sensitivity Analysis for Trabecular Bone Modelling”. North American Congress on Biomechanics (NACOB), Ottawa, ON, Canada, August 2022.

  6. Pérez-Pozo L., Prieto C., Campillo M., Ploeg H.L., Vivanco J.F. “Finite Element Analysis of µ-CT Trabecular Bone Model: A Numerical Methodology to Evaluate the Influence of Structural Adaptation on Biomechanical Response”. North American Congress on Biomechanics (NACOB), Ottawa, ON, Canada, August 2022.

  7. Contreras-Raggio J., Toro C., Correa A., Agulo-Pineda C., Ploeg H.L., Aiyangar A., Vivanco J.F., “Compressive Properties of 3D-Printed Porous Bone Surrogate Polymer Scaffolds”. North American Congress on Biomechanics (NACOB), Ottawa, ON, Canada 2022.

  8. Zojaji M., Collins C, Vivanco J.F., Burgers T., Ploeg H.L. “Homogeneous vs. Heterogeneous Finite Element Analyses of Mice Femur from Different Genotypes”. Orthopaedic Research Society (ORS 2022) Annual meeting. Tampa, FL, USA 2022.

  9. Benjumeda I., Ebenstein D., Ramajo L., Millán C., Vivanco J.F. “Nanomechanical Evaluation Of Argopecten Purpuratus Under Upwelling Scenarios” 26th Congress of the European Society of Biomechanics (ESB). Italy 2021.

  10. Funk J.V., Kunath B., Vivanco J.F., Ploeg H.L., “FEA Simulation of Parametric Trabecular Bone Scaffolds”, Orthopaedic Research Society (ORS 2021) Annual meeting (virtual conference). 2021.

  11. Labra F.A., San Martín V., Jahnsen N., Fernández C., Zapata J., Duarte C., García C., Vivanco J.F., Lagos N.A., Lardies M.A. “Modelling the effect of environmental variation in multiple stressors on physiological traits of the intertidal ecosystem engineer Perumytilus purpuratus (Lamarck 1810) along a geographical ocean acidification gradient in the South Eastern Pacific”. Festival of Ecology from British Ecological Society. 2020.

  12. Benjumeda I., Lardies M.A., Lagos N., Ploeg H.L., Vivanco J.F. “Micromechanical Analyses of Argopecten Purpuratus Exposed to a Climate Change Scenario by Depth Sensing Indentation”. Festival of Ecology from British Ecological Society. 2020.

  13. Vallejos R., Contreras J., Aiyangar A., Palza J., Vivanco J.F. “Effect of 45S5 Bioglass on the Mechanical and Biological Performance of 3D Printed PCL Scaffolds”. European Orthopaedic Research Society (EORS) 28th Annual Meeting (virtual conference). Turkey 2020.​

  14. Vallejos R., Contreras J., Toro C., Ploeg H., Pérez L., Vivanco J.F. “Biomechanical Evaluation of low-cost 3D Printed Scaffolds as in vitro Tissue Engineering Models”. European Orthopaedic Research Society (EORS) 28th Annual Meeting (virtual conference). Turkey 2020.

  15. ​Benjumeda I., Millán C., Muñoz A., Lardies M, Ploeg H., Vivanco J.F. “Marine Biomaterials for Bone Tissue Regeneration: a Biocompatible evaluation with Stem Cells”. European Orthopaedic Research Society (EORS) 28th Annual Meeting (virtual conference). Turkey 2020.

  16. ​Urrutia F., Vallejos R., Ploeg H., Aiyangar., Vivanco J.F. "Mechanical evaluation of 3D-printed scaffolds: A 3 to 3 full-factorial analysis of geometrical parameters". International Society of Biomechanics (ISB), Calgary, Canada, August 2019. 

  17. ​Benjumeda I., Millán C., Vivanco J.F., “Microarquitecture of Calcium Phosphate Bioceramics as a Determinant Parameter for in vitro Osteogenic Differentiation of Human Gingival Mesenchymal Stem Cells”. 8th World Congress of Biomechanics (WCB), Dublin, Ireland, July 2018.

  18. ​Abarca A., García C., Vivanco J.F., Lagos N., Lardies M., “Mechanical Behavior on Shell Characteristics of the Juvenile Scallops (Argopecten purpuratus) Subject to Climate Change Scenarios”. 8th World Congress of Biomechanics (WCB), Dublin, Ireland, July 2018.

  19. ​Vivanco J.F., Aiyangar A., Ploeg H., “Bioactivity of a Macro-porous Bioceramic Bone Scaffold Fabricated at Two Sintering Temperatures”. 8th World Congress of Biomechanics (WCB), Dublin, Ireland, July 2018.

  20. ​Irribarra V., Chen Z., Benjumeda I., Palza H., Millán C., Vivanco J.F., “Analysis of Mesenchymal Stromal Cells in Combination with Bioglass as a Structural and Functional Basis for Bone Tissue Engineering”. 1st National Congress of Tissue Engineering and Regenerative Medicine, Santiago, Chile, November, 2017.

  21. ​Vivanco J.F., Benjumeda I., Irribarra V., Millán C, “Ca-P Bioceramics as Bioactive Support for Human Gingival Mesenchymal Stem Cell Osteogenic Differentiation in vitro”. 2017 Annual Meeting & Exposition of the Society for Biomaterials, Minneapolis, MN, April 2017.

  22. ​Vivanco J.F., “Characterization of Multiscale Material Properties of Bioceramic Bone Scaffolds”. 7th International Conference on Multiscale Modelling and Methods: Upscaling in Engineering and Medicine, Santiago, Chile, January 2017.

  23. ​Vivanco J.F., Ploeg H., “Bioactivity and Biomechanical Characterization of Bioceramic Bone Scaffolds”. 14th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE), Tel Aviv, Israel, September 2016. 

  24. ​Meyer L., Vivanco J.F., Ploeg H., “Multi-scale Mechanical Analysis of Injection Molded Beta Tricalcium Phosphate Bone Scaffolds”. 13th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE), Montreal, Canada, September 2015.

  25. ​Vivanco J.F., Slane J., Aiyangar A., Ploeg H., “Multiscale Properties of a Macro-Porous Bioceramic Bone Scaffold Fabricated at Two Sintering Temperatures”. 7th World Congress of Biomechanics (WCB), Boston, MA, July 2014.

  26. ​Slane J., Vivanco J., Squire M., Ploeg H., “Silver-Doped Antimicrobial Bone Cement for use in Total Joint Replacement”. 7th World Congress of Biomechanics (WCB), Boston, MA, July 2014.

  27. ​Collins C., Skon S., Burgers T., Vivanco J., Ploeg H. “Fracture Healing in Mice Lacking Pten in Osteoblasts: A Micro-Computed Tomography Image-Based Analysis of Bone Strength”. 7th World Congress of Biomechanics (WCB), Boston, MA, July 2014.

  28. ​Meyer L., Johnson M., Vivanco J., Ploeg H., Cullen D., Smith E. “Mechanical Loading and Exposure to Big Endothlin-1 Increases Bone Formation in Ex Vivo Bovine Trabecular Cores”. 7th World Congress of Biomechanics (WCB), Boston, MA, July 2014.

  29. ​Vivanco J., Slane J., Ploeg H., Crenshaw T. “Regional Differences in the Nanoscale Static and Creep Properties of Porcine Bone Subjected to Different Dietary Conditions”. 3rd Global Congress on NanoEngineering for Medicine and Biology (NEMB), San Francisco, CA, February 2014.

  30. ​Slane J., Vivanco J., Ploeg H., Squire M. “The Dynamic and Static Properties of an Acrylic Bone Cement Modified with Mesoporous Silica Nanoparticles”. 5th International Conference on Mechanics of Biomaterials and Tissues, Sitges, Spain, December 2013.

  31. ​Cullen D., Alvarez G., Johnson M., Vivanco J., Ploeg H., Smith E. “Mechanical Loading and Big Endothelin-1 in Trabecular Bone Cores”. American Society of Bone and Mineral Research (ASBMR), Baltimore, MD, October 2013.

  32. ​Aiyangar A., Vivanco J., Au A., Anderson P., Smith E., Ploeg H. “Dependence of Human Lumbar Vertebral Trabecular Bone Mechanical Anisotropy Ratio on QCT-Based Apparent Density. Proceedings of the American Society of Mechanical Engineering- Summer Bioengineering Conference, Sunriver, OR, June 2013.

  33. ​Vivanco J., Aiyangar A., Collins C., Ploeg H. “Bioactivity of Bioceramic Bone Scaffolds Fabricated at Two Sintering Temperature”. Proceeding of the Innovations in Biomedical Materials, Raleigh, NC, September 2012.

  34. ​Meyer L., Johnson M., Vivanco J., Ploeg H., Blank R., Smith E. “Exposure to Big Endothlin-1 in Bovine Sternal Cores Mimics Some Aspects of Mechanical Loading”. American Society for Bone and Mineral Research (ASBMR), Minneapolis, MN, October 2012.

  35. ​Vivanco J., Araneda A., Ploeg H. “Effect of the Sintering Temperature on Microstructural Properties of a Bioceramic Bone Scaffold”.  Proceeding of the Materials Science & Technology Conference (MS&T), Columbus, OH, October 2011.

  36. ​Vivanco J., Slane J., Ploeg H.  “Nano-mechanical properties of bioceramic bone scaffolds fabricated at three sintering temperatures”. Proceedings of the American Society of Mechanical Engineering- Summer Bioengineering Conference, Farmington, PA, June 2011.

  37. ​Vivanco J., García S., Smith, E., Ploeg H. “Dynamic Loading Increases Apparent Elastic Modulus of Ex Vivo Trabecular Bovine Bone”. American Society for Bone and Mineral Research (ASBMR), Toronto, Canada, October 2010.

  38. Vivanco J., Smith B., Blake A., Ploeg H., Turner K. “3D Elastomeric Scaffolds- Fabricated by Casting in Micro End Milled Molds”. Proceedings of the 5th International Conference on MicroManufacturing (ICOMM/4M), Madison, WI, April 2010.

  39. ​Vivanco J., Garcia-Rodriguez S., Smith E., Ploeg H.  “Material and Mechanical Properties of Tricalcium Phosphate-based (TCP) Scaffolds”. Proceedings of the American Society of Mechanical Engineering- Summer Bioengineering Conference, Lake Tahoe, CA, June 2009.

  40. ​Fang Z., Vivanco J., Rufner A., Levine D., Johnson T. “The Effect of Poly Thickness on Contact Stress in low Stiffness Porous Metal-backed Acetabular Component: Is 4mm minimum thickness poly a gold standard?” Orthopaedic Research Society, 54th annual meeting, San Francisco, CA, 2008.

Conferencias y patentes: Texto

PATENTES

·1. Orthopedic Component of Low Stiffness - 07-30-2009


Inventors: Clarence M. PanchisonAlicia RufnerArchie W, Newsome Kirt L, Case Zhibin FangJuan VivancoOludele O. PopoolaRobby KisslingBrion R. MimnaughDirk L. PletcherRandy L. Schlemmer. IPC8 Class: AA61F228FI, USPC Class: 623 1611.


2. Medical Implants and Methods for Delivering Biologically Active Agents - 04-30-2009


Inventors: Zhibing Fang, Yang W. Son, Juan Vivanco, Kai Zhang, Danny L. Levine. IPC8 Class: AA61F202FI, USPC Class: 623 1111.

bottom of page